_edited.png)
%20Training%20Course.jpg)
ACCREDITATIONS
Clients
Training Service Description
Course Duration
1 Day
Training Delivery Method
Classroom (Instructor-Led)
Instructors Languages
English / Arabic
Certification Provider
Tamkene Saudi Training Center - Approved by TVTC (Technical and Vocational Training Corporation)
Certificate Validity
2 Years (Extendable with additional training hours)
Course Average Passing Rate
99%
Competency Assessment Criteria
Practical Assessment and knowledge Assessment
Post Training Reporting
Post Training Report + Candidate(s) Training Evaluation Forms
Training Design Methodology
ADDIE Training Design Methodology
Certificate of Successful Completion
Certification is provided upon successful completion. The certificate can be verified through a QR-Code system.
Course Overview
This intensive Drilling Simulator (DrillSim-50) training course provides participants with essential knowledge and practical skills required for effective drilling operations through advanced simulation technology. The course covers fundamental drilling principles along with advanced well control procedures and operational decision-making methodologies using state-of-the-art drilling simulation systems.
Participants will learn to apply industry best practices and international standards including IADC drilling standards, API RP 16E, and NORSOK D-001 to ensure safe and efficient drilling operations through systematic simulator-based training. This course combines theoretical concepts with hands-on practical applications and real-world drilling scenarios to ensure participants gain immediately applicable skills while emphasizing operational safety and drilling optimization.
Key Learning Objectives
Understand fundamental drilling operations and simulator technology applications
Apply proper drilling parameter optimization and monitoring techniques effectively
Implement comprehensive well control procedures and kick detection methods
Execute drilling fluid management and circulation system operations
Evaluate drilling equipment operation and troubleshooting procedures
Apply directional drilling techniques and trajectory control methods
Implement drilling safety protocols and emergency response procedures
Execute drilling performance analysis and optimization strategies
Course Outline
1. Introduction to Drilling Simulation Technology
Drilling simulator fundamentals including (DrillSim-50 capabilities, training applications, operational scenarios, and safety benefits)
Simulation technology including (real-time modeling, physics-based simulation, equipment representation, and training effectiveness)
IADC standards integration including (drilling competency, training requirements, operational procedures, and safety protocols)
Training objectives including (skill development, competency validation, procedure practice, and emergency preparedness)
2. Drilling Operations and Parameter Control
Drilling parameters including (weight on bit, rotary speed, pump rate, and drilling fluid properties)
Parameter optimization including (rate of penetration, drilling efficiency, equipment protection, and cost optimization)
API RP 16E applications including (drilling line inspection, wire rope maintenance, safety factors, and operational limits)
Operational monitoring including (drilling data analysis, trend identification, parameter adjustment, and performance evaluation)
3. Well Control and Kick Management
Well control principles including (primary control, secondary control, kick detection, and response procedures)
Kick indicators including (flow rate changes, pit volume increases, pressure variations, and drilling break analysis)
NORSOK D-001 requirements including (well control equipment, testing procedures, operational limits, and competency standards)
Emergency procedures including (kick circulation, shut-in procedures, kill operations, and blowout prevention)
4. Drilling Fluid Systems and Management
Drilling fluid functions including (hole cleaning, pressure control, formation protection, and equipment lubrication)
Fluid properties including (density, viscosity, filtration, and chemical composition)
Circulation systems including (mud pumps, surface equipment, downhole circulation, and returns processing)
Fluid maintenance including (conditioning procedures, additive management, contamination control, and disposal requirements)
5. Drilling Equipment Operations and Troubleshooting
Drilling equipment including (drawworks, rotary systems, hoisting equipment, and power transmission)
Equipment operation including (startup procedures, operational parameters, maintenance requirements, and safety protocols)
Troubleshooting procedures including (equipment malfunction, operational problems, diagnostic techniques, and corrective actions)
Maintenance planning including (preventive maintenance, inspection schedules, component replacement, and performance monitoring)
6. HSE in Drilling Simulator Operations
Drilling safety protocols including (personal protective equipment, hazard identification, risk assessment, and emergency procedures)
Environmental protection including (drilling waste management, spill prevention, air emissions, and regulatory compliance)
Simulator safety including (equipment operation, emergency shutdown, personnel protection, and training protocols)
Regulatory compliance including (IADC standards, API recommendations, international requirements, and audit preparation)
1. Introduction to Drilling Simulation Technology
Drilling simulator fundamentals including (DrillSim-50 capabilities, training applications, operational scenarios, and safety benefits)
Simulation technology including (real-time modeling, physics-based simulation, equipment representation, and training effectiveness)
IADC standards integration including (drilling competency, training requirements, operational procedures, and safety protocols)
Training objectives including (skill development, competency validation, procedure practice, and emergency preparedness)
2. Drilling Operations and Parameter Control
Drilling parameters including (weight on bit, rotary speed, pump rate, and drilling fluid properties)
Parameter optimization including (rate of penetration, drilling efficiency, equipment protection, and cost optimization)
API RP 16E applications including (drilling line inspection, wire rope maintenance, safety factors, and operational limits)
Operational monitoring including (drilling data analysis, trend identification, parameter adjustment, and performance evaluation)
3. Well Control and Kick Management
Well control principles including (primary control, secondary control, kick detection, and response procedures)
Kick indicators including (flow rate changes, pit volume increases, pressure variations, and drilling break analysis)
NORSOK D-001 requirements including (well control equipment, testing procedures, operational limits, and competency standards)
Emergency procedures including (kick circulation, shut-in procedures, kill operations, and blowout prevention)
4. Drilling Fluid Systems and Management
Drilling fluid functions including (hole cleaning, pressure control, formation protection, and equipment lubrication)
Fluid properties including (density, viscosity, filtration, and chemical composition)
Circulation systems including (mud pumps, surface equipment, downhole circulation, and returns processing)
Fluid maintenance including (conditioning procedures, additive management, contamination control, and disposal requirements)
5. Drilling Equipment Operations and Troubleshooting
Drilling equipment including (drawworks, rotary systems, hoisting equipment, and power transmission)
Equipment operation including (startup procedures, operational parameters, maintenance requirements, and safety protocols)
Troubleshooting procedures including (equipment malfunction, operational problems, diagnostic techniques, and corrective actions)
Maintenance planning including (preventive maintenance, inspection schedules, component replacement, and performance monitoring)
6. HSE in Drilling Simulator Operations
Drilling safety protocols including (personal protective equipment, hazard identification, risk assessment, and emergency procedures)
Environmental protection including (drilling waste management, spill prevention, air emissions, and regulatory compliance)
Simulator safety including (equipment operation, emergency shutdown, personnel protection, and training protocols)
Regulatory compliance including (IADC standards, API recommendations, international requirements, and audit preparation)
Group Exercises
Drilling operation checklists including (parameter monitoring, equipment operation, safety procedures)
Well control procedures including (kick detection protocols, emergency response plans, circulation calculations)
Simulator operation guides including (startup procedures, parameter control, troubleshooting protocols)
Gained Core Technical Skills
Proficiency in drilling simulator operation and drilling parameter control
Competency in well control procedures and kick management
Expertise in drilling fluid management and equipment operation
Knowledge of drilling safety protocols and emergency response
Services Geographical Coverage
In Tamkene Training Center or On-Site: Covering All Saudi Arabia Cities (Dammam - Khobar - Dhahran - Jubail - Qatif - Saihat - Safwa - Ras Tanura - Al Ahsa - Abqaiq - Nairiyah - Hafr Al Batin - Haradh - Khurais - Tanajib - Ras AlKhair - Jafurah - Fadhili - Wasit - Manifa - Berri - Shaybah - Hawiyah - Uthmaniyah - Riyadh - Shaqra - Dhurma - Wasea - AlKharj - Al Majmaah - Sudair - Zulfi - Qassim - Buraydah - Unaizah - Jeddah - Makkah - AlArous - Taif - Rabigh - Madinah - Yanbu - AlUla - Tabuk - NEOM - Oxagon - The Line - Waad AlShamal - Arar - Umluj - Hail - Sakaka - Abha - Khamis Mushait - Najran - Jazan - AlBahah - Jouf - Any City or location in Saudi Arabia
Targeted Audience
Drilling engineers and operations personnel
Drill crew members and drilling supervisors
Well control specialists and drilling technicians
Training instructors and drilling consultants
New drilling personnel requiring operational training
Experienced drillers seeking simulator proficiency
Oil and gas students pursuing drilling careers
International drilling personnel requiring standardized training
Practical Assessment
Hands-on simulator exercises including (drilling operation scenarios, parameter optimization, equipment operation procedures)
Well control simulations including (kick management scenarios, emergency response drills, circulation procedures)
Equipment operation workshops including (simulator controls, parameter adjustment, troubleshooting procedures)
Knowledge Assessment
Technical quizzes on drilling operations including (multiple-choice questions on drilling parameters, matching exercises for equipment functions)
Scenario-based assessments on well control including (kick detection scenarios, emergency response procedures, simulation exercises)
Simulator competency evaluations including (operational procedures, parameter control, troubleshooting techniques, performance analysis)
Why Choose This Course
Advanced DrillSim-50 Simulator Training
Comprehensive IADC Standards Coverage
Real-World Drilling Scenario Practice
Expert Drilling Operations Instruction
Industry-Standard Simulation Technology
Note: This course outline, including specific topics, modules, and duration, is subject to change and also can be customized based on the specific needs and requirements of the client.
Recommended Courses
_edited.jpg)
Suggested Questions
.png)
The training I received from Tamkene was truly exceptional.
Dalal AlSaeed
.png)
Choosing Tamkene for our professional development was a game-changer.
Wafi AlZayer
.png)
Tamkene delivered quality training with a strong focus on standards. The organization and delivery exceeded our expectations.
Saad AlMisehal
Testimonial