_edited.png)
ACCREDITATIONS
Clients
.webp)
.webp)
RESULTS-ORITNTED Training Description
Course Duration
1 Day
Training Delivery Method
Classroom (Instructor-Led)
Instructors Languages
English / Arabic / Urdu / Hindi / Pashto
Certification Provider
Tamkene Saudi Training Center - Approved by TVTC (Technical and Vocational Training Corporation)
Certificate Validity
2 Years (Extendable with additional training hours)
Course Average Passing Rate
97%
Competency Assessment Criteria
Practical Assessment and Knowledge Assessment
Post Training Reporting
Post Training Report + Candidate(s) Training Evaluation Forms
Training Design Methodology
ADDIE Training Design Methodology
Certificate of Successful Completion
Certification is provided upon successful completion. The certificate can be verified through a QR-Code system.
Course Overview
Sand blasting generates intense airborne particulate, high-pressure equipment hazards, and confined or semi-confined work conditions — a combination that demands strict operational discipline to protect the operator's health and achieve consistent surface preparation quality. In fabrication, marine, and industrial maintenance operations across the Middle East, where structural steel, pipelines, and tanks routinely require abrasive blasting before coating, safe and competent blaster operation is essential to both worker protection and project quality.
This training course is designed to build practical competency in safe sand blasting operation for personnel responsible for surface preparation work. The course is aligned with OSHA 29 CFR 1910.94: Ventilation and SSPC-SP: Surface Preparation Standards, which establish the framework for abrasive blasting exposure control and surface preparation quality. Participants will learn to identify blasting hazards, apply correct equipment operation and PPE use, achieve required surface cleanliness standards, and work safely under supervision in blasting environments.
Key Learning Objectives
Explain the hazards associated with sand blasting operations including (dust exposure, noise, and equipment pressure hazards)
Identify abrasive media types and select appropriate media for the task
Apply SSPC-SP surface preparation standards to achieve required cleanliness and profile
Select and use appropriate personal protective equipment for blasting tasks
Apply safe blasting equipment setup and operating procedures under supervision
Comply with ventilation, containment, and waste disposal requirements
Course Outline
1. Introduction to Sand Blasting Operations
Overview of sand blasting and its role in surface preparation including (rust removal, coating adhesion, and surface profiling)
Applicable international standards and regulatory requirements including (OSHA 29 CFR 1910.94, SSPC-SP standards, and local environmental regulations)
Roles and responsibilities including (blaster, pot operator, and supervisor duties)
Overview of sand blasting incidents and their primary causes including (uncontrolled dust exposure, hose failure, and equipment misuse)
2. Abrasive Media and Equipment
Common abrasive media types including (silica sand, steel grit, and garnet) and their applications
Blasting equipment components including (pot, hoses, nozzles, and air compressor systems)
Equipment pre-use inspection including (hose condition, nozzle wear, and deadman control function)
Selecting media and pressure settings based on substrate requirements
3. Surface Preparation Standards
Applying SSPC-SP cleanliness standards including (near-white metal, commercial blast, and brush-off blast grades)
Achieving required surface profile depth for coating adhesion
Verifying surface cleanliness including (visual comparison standards)
Identifying surface contaminants including (rust, mill scale, and oil)
4. Hazard Control and Personal Protective Equipment
Respiratory protection requirements including (supplied-air blasting hoods and abrasive-rated respirators)
Hearing, eye, and skin protection including (hearing protection, blast-resistant clothing, and gloves)
Ventilation and dust containment measures including (containment enclosures and exhaust systems)
Recognizing silica exposure risks and applicable exposure limits
5. Safe Blasting Operation
Pre-operation setup and area containment including (barricading, signage, and dust control measures)
Safe blasting technique including (nozzle angle, distance, and consistent coverage)
Communication protocols between blaster and pot operator including (signal systems and emergency stop procedures)
Post-blasting cleanup and area restoration
6. Waste Management and Environmental Considerations
Handling and containment of spent abrasive material
Waste disposal procedures in accordance with environmental regulations
Preventing dust migration to surrounding work areas
Housekeeping practices to maintain a safe blasting work area
7. Group Discussion and Case Studies
Case studies from regional sand blasting incidents including (respiratory exposure events, hose whip injuries, and inadequate containment failures) and lessons learned in prevention
Group discussion on common safety shortfalls including (rushed setup, inadequate containment, and PPE non-compliance)
Sharing regional best practices including (heat and humidity considerations for blasting operations)
Discussion on integrating sand blasting operations within site HSE management systems
1. Introduction to Sand Blasting Operations
Overview of sand blasting and its role in surface preparation including (rust removal, coating adhesion, and surface profiling)
Applicable international standards and regulatory requirements including (OSHA 29 CFR 1910.94, SSPC-SP standards, and local environmental regulations)
Roles and responsibilities including (blaster, pot operator, and supervisor duties)
Overview of sand blasting incidents and their primary causes including (uncontrolled dust exposure, hose failure, and equipment misuse)
2. Abrasive Media and Equipment
Common abrasive media types including (silica sand, steel grit, and garnet) and their applications
Blasting equipment components including (pot, hoses, nozzles, and air compressor systems)
Equipment pre-use inspection including (hose condition, nozzle wear, and deadman control function)
Selecting media and pressure settings based on substrate requirements
3. Surface Preparation Standards
Applying SSPC-SP cleanliness standards including (near-white metal, commercial blast, and brush-off blast grades)
Achieving required surface profile depth for coating adhesion
Verifying surface cleanliness including (visual comparison standards)
Identifying surface contaminants including (rust, mill scale, and oil)
4. Hazard Control and Personal Protective Equipment
Respiratory protection requirements including (supplied-air blasting hoods and abrasive-rated respirators)
Hearing, eye, and skin protection including (hearing protection, blast-resistant clothing, and gloves)
Ventilation and dust containment measures including (containment enclosures and exhaust systems)
Recognizing silica exposure risks and applicable exposure limits
5. Safe Blasting Operation
Pre-operation setup and area containment including (barricading, signage, and dust control measures)
Safe blasting technique including (nozzle angle, distance, and consistent coverage)
Communication protocols between blaster and pot operator including (signal systems and emergency stop procedures)
Post-blasting cleanup and area restoration
6. Waste Management and Environmental Considerations
Handling and containment of spent abrasive material
Waste disposal procedures in accordance with environmental regulations
Preventing dust migration to surrounding work areas
Housekeeping practices to maintain a safe blasting work area
7. Group Discussion and Case Studies
Case studies from regional sand blasting incidents including (respiratory exposure events, hose whip injuries, and inadequate containment failures) and lessons learned in prevention
Group discussion on common safety shortfalls including (rushed setup, inadequate containment, and PPE non-compliance)
Sharing regional best practices including (heat and humidity considerations for blasting operations)
Discussion on integrating sand blasting operations within site HSE management systems
Group Exercises
Team-based scenario exercise including (planning a blasting task, identifying hazards, and selecting appropriate controls)
Case study analysis on a blasting-related incident including (identifying root causes and proposing corrective actions)
Gained Core Technical Skills
Ability to select appropriate abrasive media and blasting equipment settings for the task
Proficiency in achieving and verifying SSPC-SP surface preparation standards
Competency in selecting and using appropriate PPE and ventilation measures for blasting tasks
Skill in safely operating blasting equipment and applying consistent, controlled technique
Ability to manage waste handling and environmental compliance for spent abrasive material
Understanding of containment and confined space considerations for blasting operations
Services Geographical Coverage
In Tamkene Training Center or at our client's facility (On-Site), Covering All Saudi Arabia Cities and Locations:
Targeted Audience
Blasters involved in surface preparation for fabrication and maintenance work
HSE officers and safety supervisors overseeing blasting operations
Site supervisors and foremen coordinating fabrication and maintenance work
Quality inspectors responsible for verifying surface preparation standards
Any personnel required to perform or support sand blasting tasks on site
Practical Assessment
Supervised blasting equipment setup and operation exercise including (pre-use inspection and safe blasting technique demonstration)
Surface preparation verification exercise including (assessing a blasted surface against SSPC-SP cleanliness standards)
PPE donning and use demonstration including (correct respiratory and blast-resistant equipment application)
Knowledge Assessment
Multiple-choice questions on abrasive media, equipment, and applicable standards including (SSPC-SP surface preparation grades)
Scenario-based questions on selecting appropriate PPE and ventilation measures for blasting tasks
Surface preparation questions including (cleanliness verification and profile requirements)
Waste handling and environmental compliance questions
Why Choose This Course
Aligned with OSHA 29 CFR 1910.94 and SSPC-SP standards for internationally credible blasting competency
Delivers a complete learning journey from equipment operation and surface preparation through to hazard control and waste management
Applies structured hazard control to real-world blasting scenarios, developing proactive exposure management skills
Structured practical exercises conducted under supervision build genuine technical confidence and quality awareness
Incorporates regional case studies addressing heat, humidity, and confined space conditions common across Middle East fabrication and maintenance sites
Note: This course outline, including specific topics, modules, and duration, can be customized based on the specific needs and requirements of the client.
.webp)
Recommended Courses
.webp)
Suggested Questions
.webp)
The training I received from Tamkene was truly exceptional.
Dalal AlSaeed
.webp)
Choosing Tamkene for our professional development was a game-changer.
Wafi AlZayer
.webp)
Tamkene delivered quality training with a strong focus on standards. The organization and delivery exceeded our expectations.
Saad AlMisehal
Testimonial