_edited.png)
ACCREDITATIONS
Clients
.webp)
.webp)
RESULTS-ORITNTED Training Description
Course Duration
1 Day
Training Delivery Method
Classroom (Instructor-Led)
Instructors Languages
English / Arabic / Urdu / Hindi / Pashto
Certification Provider
Tamkene Saudi Training Center - Approved by TVTC (Technical and Vocational Training Corporation)
Certificate Validity
2 Years (Extendable with additional training hours)
Course Average Passing Rate
97%
Competency Assessment Criteria
Practical Assessment and Knowledge Assessment
Post Training Reporting
Post Training Report + Candidate(s) Training Evaluation Forms
Training Design Methodology
ADDIE Training Design Methodology
Certificate of Successful Completion
Certification is provided upon successful completion. The certificate can be verified through a QR-Code system.
Course Overview
Truck and tractor failures rarely occur without warning — worn brakes, damaged hitches, and deteriorating tires often show detectable signs long before they cause a roadside breakdown or a serious incident. In construction, logistics, and industrial operations across the Middle East, where trucks and tractors are used continuously across long shifts and demanding terrain, the ability to correctly inspect and verify vehicle condition before use is a critical control against mechanical failure and preventable incidents.
This training course is designed to build practical competency in the inspection of trucks and tractors for personnel responsible for verifying vehicle condition before use. The course is aligned with OSHA 29 CFR 1910.178: Powered Industrial Trucks and ANSI/ASSE Z245: Safety Requirements for Refuse Collection, Processing, and Disposal, which establish the framework for vehicle inspection criteria and safe operational standards. Participants will learn to conduct structured pre-use inspections, identify mechanical and structural defects, verify safety systems, and correctly document and report vehicle condition in compliance with applicable standards.
Key Learning Objectives
Identify common truck and tractor types and their key structural and mechanical components
Conduct structured pre-use inspections in accordance with OSHA 29 CFR 1910.178 and ANSI/ASSE Z245 requirements
Recognize defect and rejection criteria including (brakes, tires, hitches, and steering systems)
Apply correct tagging, withdrawal, and reporting procedures for defective vehicles
Comply with documentation and inspection recordkeeping requirements
Course Outline
1. Introduction to Truck and Tractor Inspection
Overview of truck and tractor types and applications including (flatbed trucks, tractor units, and site tractors)
Applicable international standards and regulatory requirements including (OSHA 29 CFR 1910.178, ANSI/ASSE Z245, and local vehicle safety regulations)
Roles and responsibilities including (driver, competent inspector, and fleet supervisor duties)
Overview of vehicle-related incidents and their primary causes including (brake failure, tire blowouts, and hitch disengagement)
2. Vehicle Components and Systems
Key structural components including (chassis, cab, coupling systems, and load-bearing structures)
Braking systems including (service brakes, parking brakes, and air/hydraulic brake components)
Steering and suspension systems including (steering linkage, tie rods, and suspension mounts)
Electrical and lighting systems including (headlights, indicators, and warning devices)
3. Pre-Use Inspection Procedures
Conducting a structured walkaround inspection including (systematic checkpoint sequencing)
Tire and wheel inspection including (tread depth, pressure, and rim condition)
Fluid level checks including (engine oil, coolant, brake fluid, and hydraulic fluid)
Functional testing including (brake response, horn, and warning light operation)
4. Coupling and Hitch Inspection
Fifth-wheel and pintle hitch inspection including (locking mechanism and wear indicators)
Trailer connection verification including (electrical, air line, and safety chain checks)
Identifying coupling defects requiring withdrawal from service
Verifying secure coupling before vehicle movement
5. Defect Identification and Rejection Criteria
Common defect indicators including (corrosion, cracking, and excessive wear)
Brake system defect recognition including (worn linings and fluid leaks)
Structural defect recognition including (frame damage and cab integrity issues)
Determining when a vehicle must be withdrawn from service
6. Documentation, Tagging, and Reporting
Completing pre-use inspection checklists accurately
Tagging and withdrawal from service procedures for defective vehicles
Reporting requirements including (defect reports and supervisor notification)
Maintaining inspection records and vehicle history documentation
7. Group Discussion and Case Studies
Case studies from regional truck and tractor incidents including (brake failures, hitch disengagement, and tire blowouts) and lessons learned in prevention
Group discussion on common inspection shortfalls including (rushed inspections and overlooked defects)
Sharing regional best practices including (heat-related maintenance considerations and high-mileage fleet management)
Discussion on integrating vehicle inspection within site HSE management systems
1. Introduction to Truck and Tractor Inspection
Overview of truck and tractor types and applications including (flatbed trucks, tractor units, and site tractors)
Applicable international standards and regulatory requirements including (OSHA 29 CFR 1910.178, ANSI/ASSE Z245, and local vehicle safety regulations)
Roles and responsibilities including (driver, competent inspector, and fleet supervisor duties)
Overview of vehicle-related incidents and their primary causes including (brake failure, tire blowouts, and hitch disengagement)
2. Vehicle Components and Systems
Key structural components including (chassis, cab, coupling systems, and load-bearing structures)
Braking systems including (service brakes, parking brakes, and air/hydraulic brake components)
Steering and suspension systems including (steering linkage, tie rods, and suspension mounts)
Electrical and lighting systems including (headlights, indicators, and warning devices)
3. Pre-Use Inspection Procedures
Conducting a structured walkaround inspection including (systematic checkpoint sequencing)
Tire and wheel inspection including (tread depth, pressure, and rim condition)
Fluid level checks including (engine oil, coolant, brake fluid, and hydraulic fluid)
Functional testing including (brake response, horn, and warning light operation)
4. Coupling and Hitch Inspection
Fifth-wheel and pintle hitch inspection including (locking mechanism and wear indicators)
Trailer connection verification including (electrical, air line, and safety chain checks)
Identifying coupling defects requiring withdrawal from service
Verifying secure coupling before vehicle movement
5. Defect Identification and Rejection Criteria
Common defect indicators including (corrosion, cracking, and excessive wear)
Brake system defect recognition including (worn linings and fluid leaks)
Structural defect recognition including (frame damage and cab integrity issues)
Determining when a vehicle must be withdrawn from service
6. Documentation, Tagging, and Reporting
Completing pre-use inspection checklists accurately
Tagging and withdrawal from service procedures for defective vehicles
Reporting requirements including (defect reports and supervisor notification)
Maintaining inspection records and vehicle history documentation
7. Group Discussion and Case Studies
Case studies from regional truck and tractor incidents including (brake failures, hitch disengagement, and tire blowouts) and lessons learned in prevention
Group discussion on common inspection shortfalls including (rushed inspections and overlooked defects)
Sharing regional best practices including (heat-related maintenance considerations and high-mileage fleet management)
Discussion on integrating vehicle inspection within site HSE management systems
Group Exercises
Team-based inspection scenario exercise including (reviewing a fleet vehicle, identifying defects, and prioritizing corrective actions)
Case study analysis on a vehicle-related incident including (identifying contributing causes and proposing corrective actions)
Gained Core Technical Skills
Ability to identify truck and tractor components and their function
Proficiency in conducting structured pre-use inspections in accordance with OSHA 29 CFR 1910.178 and ANSI/ASSE Z245
Competency in recognizing defect and rejection criteria across braking, steering, and coupling systems
Skill in correctly tagging, withdrawing, and reporting defective vehicles
Ability to maintain accurate inspection documentation and recordkeeping
Services Geographical Coverage
In Tamkene Training Center or at our client's facility (On-Site), Covering All Saudi Arabia Cities and Locations:
Targeted Audience
Drivers and operators responsible for truck and tractor pre-use inspection
Fleet supervisors and maintenance personnel overseeing vehicle serviceability
HSE officers and safety supervisors supporting vehicle inspection compliance programs
Site supervisors coordinating vehicle deployment across active work areas
Any personnel required to inspect or authorize trucks and tractors for use on site
Practical Assessment
Supervised pre-use inspection exercise including (completing a full inspection checklist and identifying seeded defects)
Coupling inspection exercise including (verifying hitch and trailer connection integrity)
Defect tagging and reporting exercise including (correctly classifying and documenting non-conforming vehicles)
Knowledge Assessment
Multiple-choice questions on vehicle components, inspection requirements, and applicable standards including (OSHA 29 CFR 1910.178 requirements)
Scenario-based questions on identifying defects and applying rejection criteria
Coupling and hitch inspection questions including (verification steps and defect recognition)
Documentation and reporting questions including (tagging procedures and recordkeeping requirements)
Why Choose This Course
Aligned with Internationally Recognized Standards
Structured Defect Identification Methodology
Hands-On Inspection Practice
Practical Documentation and Reporting Skills
Regionally Relevant Case Studies
Note: This course outline, including specific topics, modules, and duration, can be customized based on the specific needs and requirements of the client.
.webp)
Recommended Courses
.webp)
Suggested Questions
.webp)
The training I received from Tamkene was truly exceptional.
Dalal AlSaeed
.webp)
Choosing Tamkene for our professional development was a game-changer.
Wafi AlZayer
.webp)
Tamkene delivered quality training with a strong focus on standards. The organization and delivery exceeded our expectations.
Saad AlMisehal
Testimonial